Thermal Engineering Services

Elgi Air Receiver
Thermal Engineering Services is one of the highly prominent dealers for sale, services and spare parts of remarkable quality of Air Receivers, which are manufactured by Elgi to handle the stress of fluctuating air demands, reduce wear and tear and increase the life of the end use equipment.

ELGI Airmate Drains Valves “ Zero loss advantage”

Compressed Air Condenses moisture in dryers, after-coolers and air receivers. This condensate requires to be eliminated frequently. In ordinary drains, there is always a loss of Compressed Air. Most of the condensate drains have a 4 mm orifice. This 4 mm orifice bleeds about 34 cfm, which is the equivalent of 6.5 kw of power. Elgi Airmate Drains works on the principle of zero air loss, and do not bleed your expensive Compressed Air, therefore you wave energy.

Elgi Filters
Alocrom Aluminium Treatment

Our company Thermal Engineering Services deals with Alocrom Aluminium Treatment is a special feature of all Elgi Airmate Die-Cast Filter Housings. This treatment ensures there is no corrosion and no carry over of corroded particles into the airline, which can otherwise cause blockades in sophisticated parts.

High efficiency General Purpose Protection

For the removal of particles down to 1 micron including coalesced liquid water and oil, providing a maximum remaining oil aerosol content of 0.5 mg/m3 @ 21 degree Celsius.

High Efficiency Oil Removal Filtration:

For the removal of particles down to 0.01 micron including water and oil aerosols, prov ind a maximum remaining oil aerosol content of 0.01 mg/m3 @ 21 degree Celsius.

Activated Carbon Filtration:

For the removal of oil vapour and hydrocarbon odour giving a maximum remaining oil content of <0.003 mg/m3 ( < 0.003 ppm) (excluding methane) @ 21 degree Celsius(precede grade CF with Grade FF & PF).